Build straight, evenly spaced rulerwork designs with confidence. The Every Angle Quilting Ruler by Amanda Murphy is a 6 mm-thick machine-quilting template designed for longarm and compatible high-shank rulerwork setups. Its straight edges, angle guides and high-visibility markings support stitch-in-the-ditch quilting, parallel lines, echo quilting, grids and a wide variety of cross-hatched designs.
At approximately 10 inches long and 2 inches wide, it offers a useful working edge without becoming overly bulky. The non-slip backing helps the ruler remain steady against the ruler foot, while contrasting markings are easier to see across both light and dark fabrics.
Why quilters choose the Every Angle ruler
- One versatile straight ruler: suitable for ditch work, straight lines, echoing, parallel channels and geometric fills.
- Multiple angle guides: markings include commonly used 15°, 22.5°, 30°, 45°, 60° and 90° angles.
- Cross-hatching made easier: align the angle and spacing guides to build repeatable grids, diamonds and diagonal textures.
- High-visibility markings: contrasting guide lines assist with positioning over different fabric colours.
- Non-slip backing: provides extra grip while the ruler is being held beside the ruler foot.
- Longarm/high-shank thickness: the 6 mm acrylic construction is designed for longarm rulerwork and compatible BERNINA setups.
- Right- or left-handed use: the straight edges and multi-directional markings can be positioned to suit your preferred quilting direction.
Verified specifications
| Product | Every Angle machine-quilting ruler |
|---|---|
| Designer | Amanda Murphy |
| Brand/collection | Good Measure |
| Quantity | 1 ruler |
| Approximate size | 10 x 2 inches (approximately 25.4 x 5.1 cm) |
| Thickness | 1/4 inch / 6 mm |
| Markings | Straight-line, spacing and angle guides, including 15°, 22.5°, 30°, 45°, 60° and 90° |
| Surface | Clear template with contrasting guide markings and non-slip backing |
| Primary uses | Stitch-in-the-ditch, echoing, parallel lines, angled lines, grids and cross-hatching |
| Two Petals SKU | 9920000224 |
What can you quilt with it?
The Every Angle ruler is a practical starting point for geometric rulerwork and a useful everyday template for experienced quilters. Use it to quilt:
- straight lines through blocks, sashing and borders
- stitch-in-the-ditch lines along patchwork seams
- evenly spaced parallel quilting
- diagonal grids and diamond cross-hatching
- square and rectangular grid fills
- angled rays and directional linework
- echo lines around piecing, appliqué or previously quilted shapes
- structured backgrounds that can be combined with free-motion quilting
The 22.5°, 45° and other angle guides are especially useful when repeating diagonal lines around a centre point or building symmetrical cross-hatched backgrounds. The ruler may also be repositioned as you work, allowing a larger area to be quilted in manageable sections.
Machine and ruler-foot compatibility
This is the 6 mm longarm/high-shank version of the Every Angle ruler. Compatibility depends on both your machine and the ruler foot fitted to it.
Suitable setups
- Longarm quilting machines fitted with a compatible rulerwork foot and suitable ruler base or work surface.
- Compatible BERNINA domestic sewing machines fitted with the Adjustable Ruler Foot #72.
- Compatible BERNINA machines fitted with the Adjustable Ruler Foot with Slit #72S, where approved for the machine model.
BERNINA specifies 1/4-inch-thick rulers for use with Foot #72 and #72S. These feet place the stitching line approximately 1/4 inch away from the ruler edge, so position the ruler with this offset in mind.
Please check before ordering
- The ruler foot is not included. A proper rulerwork foot is essential; do not guide this template against a standard free-motion or darning foot.
- A domestic machine is not automatically compatible simply because it can perform free-motion quilting.
- Low-shank machines often require a thinner ruler. Only use this 6 mm version if your machine and ruler-foot manufacturer specifically approve that thickness and provide adequate clearance.
- Check that the ruler cannot slide beneath or strike the presser-foot assembly, needle clamp or other moving parts.
- For non-BERNINA domestic machines, confirm the required ruler thickness, shank type and ruler-foot compatibility with the machine manufacturer before purchase.
If you are building a BERNINA rulerwork setup, browse the BERNINA accessories available from Two Petals . You can also explore the broader sewing machines and accessories range .
What is included?
- 1 x Amanda Murphy Good Measure Every Angle ruler, 6 mm longarm/high-shank thickness
Ruler foot, sewing machine, longarm machine, ruler base, extension table, fabric, thread and other quilting supplies are sold separately.
Tips for successful rulerwork
- Confirm your setup first. Fit the correct ruler foot and follow your machine manufacturer’s rulerwork instructions.
- Begin on a practice sandwich. Test foot height, tension, stitch length, hand position and ruler control before working on your quilt.
- Support the project. A flat extension table or longarm ruler base helps prevent the quilt from pulling away from the ruler.
- Use light, even pressure. Hold the ruler firmly enough to prevent movement without pressing so hard that the quilt cannot move smoothly.
- Keep the ruler against the foot. Guide the ruler and quilt together while maintaining gentle contact with the ruler foot.
- Reposition before overreaching. Stop with the needle down, then move your hands and ruler to a comfortable position.
- Allow for the foot offset. On a standard 1/2-inch ruler foot, the needle stitches approximately 1/4 inch from the template edge.
- Use the markings consistently. Align the same guide line with a seam or previously quilted line each time to maintain repeatable spacing.
For more quilting notions and project essentials, visit the Two Petals range of sewing and cutting tools .
Is the Every Angle ruler right for you?
Choose this ruler if you want a versatile straight-edge template for a compatible longarm or high-shank rulerwork setup. It is particularly useful for quilters who want to practise straight ruler control before adding specialised curves, circles and decorative templates.
Consider a different thickness if your machine is low shank or if its ruler foot does not safely accommodate a 6 mm template. If you are uncertain, check your machine model, fitted foot and required ruler thickness before ordering.
Frequently asked questions
Can I use the Amanda Murphy Every Angle ruler on a domestic sewing machine?
Yes, but only with a compatible rulerwork setup. The Two Petals version is 6 mm thick and is suited to compatible BERNINA domestic machines using Adjustable Ruler Foot #72 or #72S. For other domestic machines, confirm ruler thickness and foot clearance with the manufacturer before use.
Does it fit every BERNINA sewing machine?
No. Compatibility depends on whether your particular BERNINA model accepts Foot #72 or #72S. Check the accessory compatibility information for your exact machine model rather than relying on the brand name alone.
Can it be used with a BERNINA Q Series longarm?
The ruler’s 1/4-inch thickness is intended for longarm rulerwork. Your Q Series machine must be fitted with an appropriate BERNINA ruler foot and, where required, a ruler base suitable for the machine configuration.
Will it work on a low-shank sewing machine?
This is the 6 mm longarm/high-shank version. Some low-shank setups require a thinner 3 mm template because there may not be enough clearance behind the foot. Do not assume compatibility; follow the ruler-foot and machine manufacturer’s specifications.
Is a ruler foot included?
No. This product contains one Every Angle ruler only. The required rulerwork foot and other machine accessories are separate purchases.
What is the difference between this and a patchwork cutting ruler?
The Every Angle is a machine-quilting template intended to guide a ruler foot while stitching. It is not promoted as a rotary-cutting ruler and should not be substituted for a purpose-made patchwork cutting ruler.
Can I use it for stitch-in-the-ditch quilting?
Yes. Its long straight edge can be positioned alongside a seam to guide straight stitch-in-the-ditch work. Remember that the needle follows the ruler-foot offset rather than stitching directly against the ruler edge.
Can it make cross-hatched quilting designs?
Yes. The angle and spacing guides help you quilt intersecting lines for square, diagonal and diamond cross-hatching. Marking reference points on the quilt first can make larger designs easier to keep aligned.
Is the ruler non-slip?
Yes. Good Measure machine-quilting rulers feature a non-slip backing to improve control. You will still need to hold and reposition the ruler correctly while quilting.
Can beginners use this ruler?
Yes. A straight ruler is a useful first rulerwork template because it allows you to practise hand placement, steady movement, stopping and repositioning. Begin with a small practice sandwich and simple parallel lines before attempting a large cross-hatched design.
Can it be used for marking a quilt without stitching?
The straight edges and angle guides may assist with layout reference lines when used with a fabric-safe marking tool. Always test the marker on a fabric scrap and remove marks according to the marker manufacturer’s directions.
How should I store the ruler?
Store it flat or in a suitable ruler organiser, away from excessive heat and direct sunlight. Avoid placing heavy items on top of it, and protect the printed markings and non-slip surface from abrasion.
Buying summary
Best for: straight-line rulerwork, stitch-in-the-ditch, echoing, grids, parallel lines and cross-hatching on compatible longarm and high-shank setups.
Check before buying: this is a 6 mm template and requires a proper rulerwork foot. Owners of low-shank or non-BERNINA domestic machines should verify thickness and clearance before ordering.
Included: one 10 x 2-inch Amanda Murphy Good Measure Every Angle ruler.
