Create warm, substantial knits with Plassard Cascade, a soft acrylic, wool and alpaca blend designed for generous stitches and cosy cold-weather projects. Each 100g ball contains approximately 100 metres and is recommended for 8mm to 9mm knitting needles.
With a manufacturer gauge of 10 stitches and 14 rows per 10cm, Cascade is well suited to scarves, snoods, beanies, ponchos, cardigans, jumpers and other projects that call for a thick yarn. Plassard also recommends it for beginner patterns and relaxed garments for the whole family.
- Warm three-fibre blend: 60% acrylic, 20% wool and 20% alpaca
- Substantial 100g ball: approximately 100 metres per ball
- Large-needle knitting: recommended for 8mm to 9mm needles
- Manufacturer gauge: 10 stitches by 14 rows per 10cm
- Beginner-friendly possibilities: ideal for simple shapes, accessories and relaxed garments
- Easy-care guidance: machine wash at 20°C on a wool cycle, then dry flat
Choose your preferred shade from the options on the Plassard Cascade Yarn listing , or browse the wider Two Petals knitting and crochet yarn collection .
Verified Specifications
| Brand | Plassard |
|---|---|
| Range | Cascade |
| Fibre composition | 60% acrylic, 20% wool, 20% alpaca |
| Ball weight | 100g |
| Length | Approximately 100m / 109yd |
| Recommended knitting needles | 8mm to 9mm |
| Manufacturer gauge | 10 stitches x 14 rows per 10cm |
| Manufacturer garment guide | Approximately 5–6 balls for a size 40 garment; pattern requirements may vary |
| Care | Machine wash at 20°C on a wool cycle; do not bleach; dry flat; iron on a low setting |
| Quantity supplied | One 100g ball in the selected colour |
Colours Available from Two Petals
Colour options shown include:
- Blush (01)
- Black (02)
- Pewter (04)
- Navy (05)
- Beige (06)
- Airforce (22)
- Cream (27)
- Rose (31)
Please select the required colour before adding the yarn to your cart. Screen settings and lighting can affect how a shade appears, so use the colour number as well as the name when matching an existing project.
What Can You Make with Cascade?
Cascade’s warm handle and large-needle gauge make it a practical choice for projects where you want a cosy, substantial result. Suitable ideas include:
- Scarves, cowls and snoods
- Beanies and other winter accessories
- Relaxed jumpers and cardigans
- Ponchos, vests and shoulder warmers
- Chunky children’s and adult garments
- Blankets and selected knitted homewares
- Simple beginner projects using basic knit and purl stitches
- Cables, ribs and other textured patterns written to the correct gauge
For a project designed specifically around this yarn, see the Cable Jumper Knitting Pattern for Cascade Yarn . You can also explore more Cascade-compatible patterns at Two Petals .
Pattern and Yarn Compatibility
Match the gauge, not only the yarn name
When using Cascade for a pattern that names another yarn, compare the pattern’s required tension with Cascade’s manufacturer gauge of 10 stitches and 14 rows per 10cm. Also compare the required metres, fibre content and finished fabric. Always knit and measure a tension square before starting a fitted garment.
Needle size is a starting point
Plassard recommends 8mm to 9mm knitting needles, but the needle that gives you the correct gauge may differ depending on your knitting tension and the fabric required by your pattern. A smaller needle generally creates a firmer fabric, while a larger needle generally creates a more open fabric.
If you need suitable tools, browse the knitting needles and crochet hooks available from Two Petals .
Using Cascade and Cascade Tweed
Plassard lists Cascade and Cascade Tweed with the same approximate ball weight, metreage, needle range and manufacturer gauge. Some patterns may therefore offer either yarn as an option, including the Two Petals Cable Jumper pattern. The fibre blends and surface appearance are not identical, so make a fresh swatch whenever changing between the plain and tweed versions.
Buying enough yarn
Plassard’s general guide is 5–6 balls for a size 40 garment, but the correct quantity depends on the pattern, size, sleeve length, stitch pattern, needle size and individual tension. Follow the quantity stated by your chosen pattern wherever possible. For uninterrupted colour matching, purchasing the full project quantity together is recommended.
Before You Buy
- This listing is for yarn only. Knitting needles, crochet hooks and patterns are sold separately unless expressly stated otherwise.
- Check your pattern quantity. One selection adds one 100g ball in your chosen colour.
- Allow for swatching. A tension square helps confirm size, fabric and yarn requirements before you begin.
- Check the fibre content. Cascade contains both wool and alpaca and is not suitable for projects that must be free from animal fibres.
- Plan colour matching carefully. Keep ball bands and check dye-lot information on the balls before beginning a multi-ball project.
- Care for the finished piece gently. Use a 20°C wool cycle, avoid bleach and reshape the item before drying it flat.
Frequently Asked Questions
What is Plassard Cascade made from?
It is a blend of 60% acrylic, 20% wool and 20% alpaca. The manufacturer describes Cascade as a soft, warm yarn suitable for beginner projects and relaxed garments.
How much yarn is in one ball?
Each ball weighs 100g and contains approximately 100 metres, or 109 yards. The metreage is approximate, so use the pattern’s full ball requirement rather than relying on an exact leftover length.
What needle size should I use?
The recommended knitting-needle range is 8mm to 9mm. Use the size that produces your pattern’s required gauge after washing and drying your swatch according to the care instructions.
What is the knitting tension?
Plassard publishes a gauge of 10 stitches and 14 rows per 10cm. Your results can vary with needle material, stitch pattern and personal tension, so a measured swatch is essential for fitted projects.
Is Plassard Cascade a particular Australian ply?
Rather than relying on a ply label, compare its verified specifications: approximately 100m per 100g, 8mm to 9mm needles and a gauge of 10 stitches by 14 rows per 10cm. Yarn weight terminology can vary between patterns and countries.
Can I substitute Cascade for another chunky yarn?
Possibly, provided the pattern gauge, required metreage and finished fabric are compatible. Fibre blends can behave differently even when the ball weight appears similar, so make and wash a tension square before committing to the substitution.
Can I use Cascade instead of Cascade Tweed?
Some patterns are written for either option because Plassard publishes the same approximate metreage, needle range and gauge for both. Cascade Tweed has a different composition and a flecked appearance, so the finished look will differ and a new swatch is recommended.
Can I crochet with Plassard Cascade?
The manufacturer publishes knitting-needle guidance but does not specify a crochet-hook size for Cascade. If using it for crochet, follow a pattern suited to approximately 100m-per-100g yarn and choose the hook size that gives the required gauge and fabric.
How many balls do I need for a jumper?
Plassard gives a broad guide of 5–6 balls for a size 40 garment. A specific jumper may require more or less depending on its dimensions, fit, sleeves and stitch pattern. The Two Petals Cable Jumper pattern, for example, specifies 6 to 7 balls according to size.
How should I wash the finished project?
Machine wash at 20°C using a wool cycle, do not bleach, dry flat and use only a low-temperature iron. Always retain the ball band for reference and follow the most restrictive care requirement if the project includes other yarns or trims.
Is this yarn suitable for sensitive skin?
Softness and fibre sensitivity are personal. Cascade contains acrylic, wool and alpaca, so anyone sensitive or allergic to animal fibres should test the yarn against the skin or choose a suitable animal-fibre-free alternative.
Is this the same as every yarn called Cascade?
No. This product is Plassard Cascade. When choosing a pattern or purchasing extra yarn, confirm the Plassard brand, fibre composition, ball size, metreage, colour number and gauge rather than matching only the word “Cascade”.
Buying Summary
Choose Plassard Cascade when your project calls for a warm, soft and substantial yarn with approximately 100 metres per 100g ball. It is especially useful for large-needle accessories, relaxed winter garments and beginner-friendly patterns. Before ordering, confirm the project quantity, select the correct colour number and check that the published 10-stitch by 14-row gauge suits your pattern.
