BERNINA Edgestitch Foot #10 for Neat, Even Topstitching
Create clean, controlled stitching along fabric edges, hems, folds and seams with the BERNINA Edgestitch Foot #10 . Its centre guide blade follows the edge of your work while the adjustable needle position determines how close the stitching sits to that edge. This makes it easier to maintain an even line without relying on a marked seam guide alone.
Foot #10 is a versatile choice for garment making, quilting, heirloom sewing and home décor. Use it for narrow topstitching, understitching, sewing beside a seam, reinforcing an edge, attaching lace or ribbon, stitching small tucks and joining prepared fabric edges with a decorative stitch.
- Centre guide helps keep stitching parallel to an edge, fold or seam
- Useful for topstitching hems, collars, cuffs, pockets and pleats
- Suitable for applying lace, ribbon, braid and other narrow trims
- Can be used for stitch-in-the-ditch and edge-joining techniques
- Compatible with selected 5.5 mm and 9 mm BERNINA sewing machines
- BERNINA part number:Â 008455.74.00
Shop this BERNINA Edgestitch Foot #10 online from Two Petals, or browse more BERNINA accessories for your sewing machine.
What Can You Sew with Edgestitch Foot #10?
Topstitch Finished Edges
Place the foot’s guide against a finished edge, folded hem or pressed seam and move the needle to the required side. As the guide follows the fabric, the stitching stays at a consistent distance from the edge. This is particularly useful when finishing collars, cuffs, pockets, waistbands, facings and bag openings.
Sew in the Ditch
The centre blade can follow the low point of a pressed seam while the needle is set to the centre position. This helps place stitching within the seam line for discreet reinforcement, quilting or securing binding. Press the seam carefully before sewing so the guide has a clear path to follow.
Attach Lace, Ribbon and Braid
Use the guide to keep decorative trim aligned while stitching close to its edge. Depending on the project and selected stitch, lace or prepared fabric edges may also be positioned on opposite sides of the guide for controlled edge joining.
Create Tucks and Pleats
Run a folded edge beside the centre guide and adjust the needle position to set the distance between the fold and stitching. This makes Foot #10 useful for narrow tucks, pleat detailing and heirloom-style embellishment.
Understitch Facings and Linings
With the guide following the seam, Foot #10 can help position understitching close to the seam line. Understitching secures the seam allowance to the facing or lining and helps keep the finished edge from rolling towards the outside of a garment.
Verified Specifications
| Brand | BERNINA |
|---|---|
| Accessory | Edgestitch presser foot with centre guide |
| Foot designation | #10 |
| Manufacturer part number | 008455.74.00 / 0084557400 |
| Machine width compatibility | Selected BERNINA 5.5 mm and 9 mm sewing machines |
| Stitch-width capacity of Foot #10 | For stitches up to 5.5 mm wide |
| Guide position | Centre of the foot |
| Manufacturer-listed applications | Edges, hems, tucks, pleats, lace, braid, fine edging, edge reinforcement, sewing within seams and joining prepared edges |
Compatibility: Is #10 the Correct Version?
BERNINA produces several edgestitch feet with similar names, so check the complete foot designation and your machine model before ordering.
- Edgestitch Foot #10:Â this product. It is compatible with selected 5.5 mm and 9 mm BERNINA machines but is intended for stitches no wider than 5.5 mm.
- Edgestitch Foot #10C: the wider version for compatible 9 mm machines and stitches up to the machine’s 9 mm width.
- Edgestitch Foot #10D:Â the version designed for compatible BERNINA machines when the BERNINA Dual Feed system is to be engaged.
A 9 mm BERNINA machine does not automatically require #10C. Foot #10 may still be suitable when you plan to use straight stitches or other stitches no wider than 5.5 mm. Choose #10C when you need the additional sole and needle-opening width for full-width 9 mm decorative stitches.
If you specifically want to sew with BERNINA Dual Feed engaged, select the compatible D version rather than this standard #10 foot. Owners of older or vintage BERNINA machines should also confirm compatibility carefully, as BERNINA has produced different attachment styles and part-number variants over time.
Do not assume compatibility based only on the foot number or maximum stitch width. If you are uncertain, compare the part number 008455.74.00 with your machine’s accessory chart or contact Two Petals with the exact model number before purchase.
Suggested Starting Setup
For narrow straight edgestitching, BERNINA’s Foot #10 instructions recommend the following starting configuration:
- Attach Edgestitch Foot #10 and select a straight stitch.
- Set the stitch width to 0.
- Choose a stitch length between 2 and 4, adjusting it to suit the fabric and desired appearance.
- Move the needle to the left or right to set the distance from the edge.
- Position the fabric edge, fold or seam beside the centre guide.
- Sew while guiding the project gently and allowing the guide blade to follow the edge.
Always test the selected needle position and stitch on a fabric offcut first. Turn the handwheel manually before sewing to confirm that the needle clears the foot, particularly after changing needle position or selecting a wider stitch.
Helpful Sewing Tips
- Press first:Â crisp folds and well-pressed seams give the centre guide a more consistent edge to follow.
- Look ahead of the needle:Â watch where the guide meets the fabric rather than focusing only on the stitch as it forms.
- Adjust with the needle position:Â the guide controls alignment, while the needle position controls the spacing between the stitching and edge.
- Test decorative stitches:Â confirm that the complete side-to-side movement remains within the 5.5 mm capacity of Foot #10.
- Support dense stitching:Â stabiliser or interfacing may be helpful when placing decorative stitches on lightweight fabric.
- Match the needle to the material: choose an appropriate sewing-machine needle for the fabric, thread and stitch. Two Petals also carries BERNINA Universal Needles for general sewing applications.
Who Is This Foot Best For?
Edgestitch Foot #10 is a practical addition for sewists who regularly make garments, bags, quilts, soft furnishings or detailed decorative projects. It is especially useful when ordinary presser-foot markings do not provide enough control close to a fold or when you want the guide to sit directly in a seam.
Choose this version when your compatible BERNINA uses a 5.5 mm stitch width, or when you own a compatible 9 mm machine but intend to sew with stitches no wider than 5.5 mm. Consider #10C for full-width 9 mm decorative stitching or #10D when BERNINA Dual Feed operation is required.
Questions and Answers
What is BERNINA Edgestitch Foot #10 used for?
It is used to guide stitching evenly beside an edge, fold or seam. Common applications include topstitching hems and garment details, sewing tucks and pleats, attaching lace or ribbon, reinforcing edges, joining prepared edges and stitching in the ditch.
Will Foot #10 fit a 9 mm BERNINA machine?
BERNINA lists Foot #10 as compatible with selected 5.5 mm and 9 mm machines. However, Foot #10 is intended for stitches no wider than 5.5 mm. Exact compatibility must still be checked against the model-specific BERNINA accessory chart.
What is the difference between BERNINA #10 and #10C?
Both have a centre guide for edge-aligned sewing. Standard Foot #10 accommodates stitches up to 5.5 mm wide, while #10C has a wider sole and needle opening for compatible 9 mm machines and full-width 9 mm stitches.
What is the difference between #10 and #10D?
Foot #10D is designed to connect with the BERNINA Dual Feed mechanism on compatible machines. Standard Foot #10 does not have the D-foot connection required to engage Dual Feed.
Can I use Foot #10 for stitch-in-the-ditch quilting?
Yes. Place the centre guide in the pressed seam and use a centre straight-stitch needle position. The guide helps the stitching follow the seam line. For projects where Dual Feed is required to manage multiple layers, check whether #10D is the more suitable version for your machine.
Can Foot #10 sew decorative stitches?
Yes, provided the complete stitch is no wider than 5.5 mm and the needle safely clears the foot. Test the stitch slowly on an offcut before sewing the project. For full-width 9 mm decorative stitches on a compatible machine, use #10C.
Can I attach lace and ribbon with this foot?
Yes. The centre guide can follow the edge of lace, ribbon or braid while the needle is offset to place stitching beside the guide. It can also help align two prepared edges for suitable joining stitches.
Is this a universal snap-on presser foot?
No universal compatibility should be assumed. This is a model-specific BERNINA accessory, part number 008455.74.00. Check your exact sewing-machine model before ordering, particularly if you have a bernette, another machine brand or an older BERNINA.
How close to the edge will it sew?
The spacing is controlled by the available needle positions on the sewing machine. Place the centre guide against the edge and move the needle left or right until the required spacing is achieved, then test the result on a fabric offcut.
What should I check before buying?
Confirm your machine’s exact model, accessory attachment category, maximum stitch width and whether you intend to use BERNINA Dual Feed. Also check that the required part number is 008455.74.00 , rather than a vintage #10 variant, #10C or #10D.
Buying Summary
Choose BERNINA Edgestitch Foot #10 if you want a centre-guided presser foot for consistent narrow topstitching and detail work with stitches up to 5.5 mm wide. It is a useful all-round accessory for edges, hems, seams, pleats, tucks, lace, ribbon, binding and garment construction. Before purchasing, verify the exact machine model and choose #10C or #10D instead if full-width 9 mm stitches or BERNINA Dual Feed operation are essential to your project.
Explore more sewing machines and accessories available from Two Petals in Melbourne.
